[3macs1]

Also interesting how old historical homes stand so long, you think one of these cookie cutter houses will be standing 100-200 years from now? Weren’t codes back then.
I think I was born in the wrong timeline. My moral and beliefs more align with the late 1800-early 1900s. Less people trying to control you under the guise of “safety”

More like And you would be dead now since the average age to live was 38 for a male in 1850 and now 83 but we are doing everything wrong now OK

 

[TrueGrit]

Wow, I guess Wyatt Earp made out pretty good being born in 1848 and dying at the age of 80!
While getting shot at to boot!

 

[3macs1]

Wow, I guess Wyatt Earp made out pretty good being born in 1848 and dying at the age of 80!
While getting shot at to boot!

Yep That is the average age and that is what is documented That being said I think it was 29 for a few here and they are still here but living in a special world of their own

 

[3macs1]

 

[Striper66]

Heading to check out gateway market tomorrow i see they have some good prices anyone go to this place?

 

[3macs1]

Heading to check out gateway market tomorrow i see they have some good prices anyone go to this place?

Nope sorry other than my daughter loved the place when she lived up there and always said she got some great deals as far as pricing goes
have a fun day there and don't spend too much

 

[Buckmark]

It's been a while since I have been there, but it's worth going. Some good buys for sure.

 

[superslickie]

Theyre on FB to see the weekly sale
This week features grapes 0.97
Loin pork chops 1.47
A bunch of deli meat and snack kits
We usually go every week and "save" more than we spend. Its worth the drive, bring more bags than you think youll need and be patient its always busy.

 

[Striper66]

Theyre on FB to see the weekly sale
This week features grapes 0.97
Loin pork chops 1.47
A bunch of deli meat and snack kits
We usually go every week and "save" more than we spend. Its worth the drive, bring more bags than you think youll need and be patient its always busy.

Sounds good i seen the flyer and thought we check it out i dont do well in crowds so i may just have to stay in the car😅 Like to try their lean grd beef $40 for 10lbs aint too bad

 

[sako3006]

Heading to check out gateway market tomorrow i see they have some good prices anyone go to this place?

Shop there every week for their deals you can go to their web page and get on the list and have it show up every Wednesday, if you stick to the sales you can save quite a bit we buy a lot of the veggies because there cheaper than the big stores and last in the fridge

 

[3macs1]

Shop there every week for their deals you can go to their web page and get on the list and have it show up every Wednesday, if you stick to the sales you can save quite a bit we buy a lot of the veggies because there cheaper than the big stores and last in the fridge

Now I heard something from a member this morning that Kevin buys his carrots there every week in 50 pound bags to keep his old shooting eyes so sharp like an eagle they say

 

[TrueGrit]

This is the first that I've heard of this place. May have to check it out.

 

[3macs1]

Daughter just came in and I asked her and she says yep dad being in school up there I shopped there a lot. Very busy and watch the best before dates a lot of stuff is older and close to expiring on the best before dates or has expired other than that great prices especially on veggies was her comment

 

[Striper66]

Hopefully we get there early before it gets too busy and i can go in to check things out

 

[Tyson10gauge]

Well was shopping for a bench grinder for the garage and holy frig more than double in price now , average now is $160 plus tax 2 -3 yrs ago same one sold for $70 , not wanting put expensive one in off to Amazon it is better quality and little bigger HP for around $150 tax in , just to note , was even looking at some Dewalt tools even they now are being made in China , hard to find much now made North America

 

[3macs1]

Well was shopping for a bench grinder for the garage and holy frig more than double in price now , average now is $160 plus tax 2 -3 yrs ago same one sold for $70 , not wanting put expensive one in off to Amazon it is better quality and little bigger HP for around $150 tax in , just to note , was even looking at some Dewalt tools even they now are being made in China , hard to find much now made North America

Pretty much impossible and what is tagged as such the parts/ pieces are made there and just assembled here I got most of my dewalt stuff on amazon I put it in the save and watch for some to show up in the used section of each tool listing .May take a while with some but it will happen in time if in no rush So far everything I bought marked as used online there has been brand new either reboxed or box busted up. All my gardena hoses reelers for the greenhouses etc etc I do the same Most of the hoses I got like 50% vs crappy tire Do you watch the CT clearance section on line I find dewalt there also some times at good prices
Cheers

 

[Thunderstick]

Got my main breaker switch replaced on my electrical panel, about 45 minutes, disconnect / connect NSP = $1000 😀 Thats good gun money, dam.

 

[Striper66]

Got my main breaker switch replaced on my electrical panel, about 45 minutes, disconnect / connect NSP = $1000 😀 Thats good gun money, dam.

So nsp charged you $1000 to disconnect the power to your panel so electrician can change main breaker?

 

[Striper66]

Pretty much impossible and what is tagged as such the parts/ pieces are made there and just assembled here I got most of my dewalt stuff on amazon I put it in the save and watch for some to show up in the used section of each tool listing .May take a while with some but it will happen in time if in no rush So far everything I bought marked as used online there has been brand new either reboxed or box busted up. All my gardena hoses reelers for the greenhouses etc etc I do the same Most of the hoses I got like 50% vs crappy tire Do you watch the CT clearance section on line I find dewalt there also some times at good prices
Cheers

I been using dewalt power tools my entire career amongst others like milwaukee metabo makita bosch hilti etc and dewalt out performs and out lasts all of them if china is making the parts for them id say they are doing a fine job.

 

[3macs1]

Got my main breaker switch replaced on my electrical panel, about 45 minutes, disconnect / connect NSP = $1000 😀 Thats good gun money, dam.

Now I know why the boys here I know pop the meter and take their chances I guess